| Wireless Radio Specification | Dual Radio, 5GHz 802.11a/n/ac and 2.4GHz 802.11b/g/n |
| – 2.4GHz: Max 450Mbps | |
| – 5GHz: Max 1300Mbps | |
| – Dual concurrent radio support | |
| Transmit Power (Maximum Value) | |
| – 2.4GHz: Max 29dBm | |
| – 5GHz: Max 27dBm | |
| – Maximum power is limited by regulatory power | |
| Transmit Power (Maximum Value) | |
| – 2.4GHz: Max 29dBm | |
| – 5GHz: Max 27dBm | |
| – Maximum power is limited by regulatory power | |
| Supported radio technologies: | |
| – 802.11b: Direct-sequence spread-spectrum (DSSS) | |
| – 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) | |
| – 802.11n/ac: 3×3 MIMO with 3 streams | |
| – 802.11ac with 20/40/80 MHz channel width | |
| – 802.11n with 20/40 MHz channel width | |
| – 802.11a/b/g with 20 MHz channel width | |
| Supported modulation types: | |
| – 802.11b: BPSK, QPSK, CCK | |
| – 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM | |
| – 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM | |
| Supported data rates (Mbps): | |
| – 802.11b: 1, 2, 5.5, 11 | |
| – 802.11a/g: 6, 9, 12, 18, 36, 48, 54 | |
| – 802.11n: 6.5 to 450 (MCS0 to MCS23) | |
| – 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS=1 to 3) | |
| Power | Power Source: |
| – 802.3af/at compliant source | |
| – Active Ethernet (Power over Ethernet, PoE) | |
| Antennas | Internal high gain antennas: |
| – 3T3R 5dBi dual concurrent omni antenna | |
| Interface | Two 10/100/1000 BASE-T Ethernet Port: |
| – LAN1 supports 802.3af/at PoE input | |
| – LAN2 is used to extend internet signal | |
| Reset button | |
| Easy Management | Auto Channel Selection |
| – Setting varies by Regulatory Domains | |
| SSIDs: | |
| – BSSID support | |
| – 16 SSIDs support | |
| – Support 8 SSIDs on both 2.4GHz and 5GHz bands | |
| VLAN Tag: | |
| – Independent VLAN setting can be enable or disable | |
| – Any packet that enters the Device without a VLAN tag will have a VLAN tag inserted with a PVID (Ethernet Port VID) | |
| VLAN Pass-through: | |
| – VLAN pass through over WDS bridge | |
| SNMP &MIB: | |
| – v1/v2c/v3 support | |
| – MIB I/II, Private MIB | |
| Save Configuration as Default: | |
| – Saves the customized configuration as default value for different customer demands. | |
| Clients Traffic Status: | |
| – Reports the various main information timely which is required by administrator | |
| Guest Network: | |
| – Allows the administrator to manage easily grant “visitor” access within the network. | |
| E-mail Alert: | |
| – Provides a network monitoring tool for administrators to stay informed the configuration change. | |
| QoS: | |
| – Complaint with IEEE 802.11e standard | |
| RADIUS Accounting: | |
| – Help operators to offload 3G to Wi-Fi seamlessly |
